漲緊器的原理 更新時間: 2019-11-14

簡介

漲緊器作用在發動機的正時皮帶或正時鏈條上,對其起導向和漲緊的作用,使其始終處于最佳漲緊狀態。一般分為油壓和機械兩種方式,它們都可以自動的對正時皮帶和正時鏈條進行漲緊度的調節。


作用

在 正時皮帶或正時鏈條的傳動下,凸輪軸驅動氣門在正確的時間開閉,配合活塞完成進氣、壓縮、做功和排氣四個過程。由于正時皮帶和正時鏈條在中高速運轉時會發生跳動,而且正時皮帶在長期使用中會因為皮帶的材質和受力,發生拉長、變形產生跳牙導致配氣正時的不準確,從而引起車輛費油、無力、爆震等故障。當跳牙過多時因為氣門 過早打開或過晚關閉還會使氣門和上行的活塞碰撞損壞發動機。為了能讓正時皮帶和正時鏈條保持合適的漲緊度,即不因過松而跳牙也不因過緊而發生損壞,有一個專門的漲緊系統,由漲緊器和漲緊輪或導軌組成。漲緊器提供指向皮帶或鏈條的壓力,漲緊輪與正時皮帶直接接觸,而導軌直接與正時鏈條 接觸,它們在隨皮帶或鏈條運轉的同時將漲緊器提供的壓力施加在其上,使它們保持合適的漲緊程度。

under the timing belt or timing chain drive, camshaft drive valve at the right time to open and close, with the piston to complete the intake, compression, work and exhaust four processes. Because of the timing belt and timing chain in high-speed operation will occur when the beating, and timing belt in the long-term use because of belt materials and stress, deformation, occurrence of elongated teeth caused valvetiming inaccurate, causing the vehicle costs oil, weakness, detonation. When the valve is too long or the valve is too early to open or close the valve and the piston will crash the engine damage. In order to make the timing belt and timing chain to maintain the appropriate tension, that is, not too loose because of jumping teeth and not too tight and damage, there is a special tension system, by the tensioner and the tension wheel or rail composition. Tensioner provided to the belt or chain pressure, timing belt tensioner and direct contact, and direct and guide the timing chain contact with them in the belt or chain operation will also provide the tensioner pressure exerted on it, so that they maintain appropriate tension degree.

Copyright @ 2011-2016 www.gbxiax.co   車標網   蘇ICP備12030990號,我要投稿
一分快三是不是官方彩票 极速十一选五 新浪体育斯诺克 私募基金配资比例 期货配资ˉ杨方配资开户 中国的股票配资平台怎么样呀 股票配资风险 何为股票融资余额 怎么炒股新手入门 现在哪里理财最好 江苏7位数 云南十一选五 宁夏十一选五 天津快乐十分 上证指数走势图 qq股市直播 中国中车股票